I started in the Northern Forest, and took my time building up some factories to deal with all those pure iron nodes, and I’m just about to finish tier four. Has anyone been blazing a trail through the tiers? I’m curious what tier most folks are on.
I finished the first phase of the space elevator, maxed out tier 3 and 4, then got distracted trying to get coal power up and running before moving on. I was getting tired of running back and forth, constantly feeding leaves and wood into a production line for solid biofuel so I’m not dependent on biomass generators anymore.
The last thing I did was set up a steel production factory using two iron nodes, a nearby pure coal node, a copper node, and a limestone node. I’m producing tons of steel pipes and beams, then feeding about 2/3rds of them into another production line to make stators and encased industrial beams, respectively. Once I’ve built up a respectable supply, I’ll dedicate my time toward finishing phase 2 of the space elevator so I can unlock tier 5 and 6.
My wife is playing for the first time, and despite spending way more time than me building her factories, she’s barely done with tier 3. I have over 600 hours in Satisfactory, so while I’m taking my time and enjoying the journey, my experience with the game means I’m progressing much faster than her. But she’s really into the math of it, trying to squeeze every ounce of power and resource production out of her factories, so she’s going to have a much better build than me by the end.
Just getting to steel. Stupid work needing me to do stuff so my paycheck gets me food. Stupid meat bag.
Still haven’t found time and motivation simultaneously.
I feel like I would’ve gotten to oil pretty quickly then burned out again. But could be different with the mixed up tier trees
I’m only 5 hours into my 1.0 save (I have over 1,100 hours total), having already cleared Tier 1 and 2. I’m especially thrilled that the biomass burners have a conveyor input now so I don’t have to manually feed each one! My next goal is getting my blade runners and building a coal power plant.
I’m currently over-engineering the starter base, I plan for tubes, increases in throughput, change of input requirements due to alternative recipes and separating the power grid to be able to toggle specific parts on and off. I soon want to produce reinforced iron plates…
Have currently the milestone for coal selected and am about half way. But my doggy collection grows I am at 5 dogs now.
Just cheesed my way into tier 8, now I have to make a new proper base somewhere and just ignore the old spaghetti, just bought computers from the shop to pass all tiers.
Thats the best part about satisfactory
Just build a new level of foundation platforms above the spaghetti
Cover your shame
cover your shame
Too real
I got basic steel and coal power up and running. Started in the Northern Forest this time, but I got annoyed pretty fast with the lack of flat space to build. So I moved my HUB to the Grass fields because I haven’t build there in a long time and it’s actually really beautiful. Currently building my base around the HUB and will move to advanced steel soon.
Oh, and I also rushed the collection of mercer spheres because the Dimensional Depot is absolutely amazing!
Started in the desert, moved east to be closer the the coal/steel/oil. I’m currently setting up aluminium, which is insanely far away…
I did a rocky desert start at a site I don’t normally use for anything, built a starter base, got my Project Tower partially built, I’ve got a good start on my steel mill and I’ve got some starter plastic and rubber in production at a temporary slap-it-down refinery.
I struggle to keep track of phases/tiers/milestones, I’m working on the second payload to the space elevator and I’ve just unlocked trains. I’ve got a LOT to build before I pull the Space Elevator handle a second time, the Desert Automated Manufacturing Node, the West Heavy Oil Residue Extractor, and a lot of railroad need to be put in place.
My wife and I have been putzing with coal power and blueprints and experimenting with architecture for 3 days now. Haven’t really done anything productive in that time. Have completed Tier 3, and part of Tier 4.
I’m on the verge of declaring blueprints to be more trouble than they’re worth. Anyone else?
I haven’t had any real success with blueprints. I tried using them for some wall patterns, but they just refuse to line up properly.
Blueprints are wonderful in Factorio. Satisfactory added them as a heavily gimped afterthought and it unfortunately shows. Between that and never really caring much about the story of a factory game, I still can’t work up the desire to try it again.
Yeah…I found that blueprints were of limited use building structures because although you could put down foundations marginally faster than zooping (16 tiles rather than 10) 4x4 isn’t a very convenient size for this, and if you have a lot of blueprints all at once the way a large building does the game doesn’t handle it well.
With manifolds of machines it’s a problem, because say you have a manifold of assemblers. Well there’s a left-handed and a right-handed version of the input belt manifold. If you include an output belt, does it go the same or the opposite way of the input belts? Then if you need higher tier belts than you built it for, you either have to upgrade them once placed or go to a blueprint designer, make the change, notice 25 hours later that you missed one and that half your factory has been running at half speed the entire time because one Mk 2 belt didn’t get replaced in a blueprint…
Oh and exactly one manufacturer fits. I don’t think it’s usable at all with refineries or coal generators even though you use a lot of those machines.
I vastly prefer the SMART mod, and probably by the time I’ve finished this playthrough, done something else for a year or two and am ready for another run of Satisfactory it’ll be ready for 1.0.
Me, it’s not the size of the blueprint, particularly since they added 5x5 and 6x6 blueprints in 1.0, it’s the fact that blueprint placement is horrendous for seemingly everything except perfectly-rectangular structures. And non-rectangular structures are basically the ENTIRETY of thing the things that are difficult to build, and thus worth blueprinting.
Just cracked space elevator 2 and unlocked tier 5 and 6 research.
Same. One of my buddies has put our world on a dedicated server at some vps farm so it’s always online now. Which was a project of itself
My mate has a game server at home we should get an instance on that.
I just got into tier 6 today and burned through some milestones. This is my fourth play through though so I basically rushed everything with bad spaghetti just to get trains.
Now the real work begins!
I still haven’t finished mourning my factory being obsolete by 1.0 to start.
I finished up my Update 8 run in like March. I spent the last several play sessions just dumping as much as I could into the sink to get enough points to buy the Golden Nut. I had a dreadful habit of letting factories sit backed up and idle rather than letting them run into sinks. Took months to do from onboarding to buying that final trophy. But it felt complete. Entire play sessions I would just let stuff run into the sink while I was out hunting the monsters for their parts to sink because coupons were costing hundreds of millions of points by then.
Tier 2, started the first time in rocky desert, which seems to be little bit more difficult.
I just started today right around when I should’ve been getting to sleep. Got iron plates, rods, and screws as well as wires automated before forcing myself to stop.
I first (and last) played in I think update 5. It was a major PITA getting Proton to run it. I had gotten the space elevator built, but pretty sure I didn’t progress beyond that before a patch hit that caused the game to not even launch anymore.
