I have been raging about the font rendering on Linux for years. It just sucks. Font has jagged edges and it looks very weird. I dual-boot with windows and the font there is very nice. So, I asked Claude ai to help me and it did a great job and my font is now is actually better than windows. I wanted to share it with everyone in case you have the same issue with the font on Linux.

Here it is:

  1. First, install required packages:
sudo pacman -S freetype2 cairo fontconfig

2. Install better fonts:

sudo pacman -S ttf-dejavu ttf-liberation noto-fonts ttf-roboto ttf-roboto-mono ttf-droid ttf-opensans ttf-hack ttf-fira-code

I have also installed Segoe ui and Segoe UI Variable fonts and that is what I’m using now.

3. Create or edit the font configuration file:

sudo mkdir -p /etc/fonts/conf.d

sudo nano /etc/fonts/local.conf

4. Add this configuration to local.conf:

<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
<fontconfig>
<match target="font">
<edit name="antialias" mode="assign">
<bool>true</bool>
</edit>
<edit name="hinting" mode="assign">
<bool>true</bool>
</edit>
<edit name="hintstyle" mode="assign">
<const>hintslight</const>
</edit>
<edit name="rgba" mode="assign">
<const>rgb</const>
</edit>
<edit name="lcdfilter" mode="assign">
<const>lcddefault</const>
</edit>
<edit name="embeddedbitmap" mode="assign">
<bool>false</bool>
</edit>
<edit name="autohint" mode="assign">
<bool>true</bool>
</edit>
</match>
<!-- Increase contrast slightly for all fonts  This is not mandatory and can be commented out-->
<match target="font">
<edit name="weight" mode="assign">
<const>medium</const>
</edit>
</match>
</fontconfig>

5. Create a file for FreeType settings:

sudo nano/etc/profile.d/freetype2.sh

6. Add these export commands (I found it there already, but it was commented out. Just removed the “#”):

export FREETYPE_PROPERTIES="truetype:interpreter-version=40"

7. Enable subpixel rendering: (You might get a message that says “File exist”, that’s ok. It means it was already there)

sudo ln -s /etc/fonts/conf.avail/70-no-bitmaps.conf /etc/fonts/conf.d/

sudo ln -s /etc/fonts/conf.avail/10-sub-pixel-rgb.conf /etc/fonts/conf.d/

8. Clear and regenerate font cache:

fc-cache -fv

9. For better Java application fonts:

sudo pacman -S jre-openjdk fontconfig

10. Reboot


Additional optional steps: a. For better Firefox font rendering, in about:config: Set

gfx.font_rendering.cleartype_params.rendering_mode

to 5 (This doesn’t exist in FF. You create it, set it to “number” and give it a value of 5)

Set

gfx.webrender.all

to true

b. If you use VSCode, add to settings.json:

{
"editor.fontFamily": "'Fira Code, 'Droid Sans Mono', 'monospace'",

"editor.fontLigatures": true
}

Truly hope this help someone. Share it with others if you think it will help them.

Thanks :)

  • penquin@lemm.eeOP
    link
    fedilink
    arrow-up
    5
    ·
    14 days ago

    That was a great read, although I didn’t understand all of it. All I know is that my font looks fantastic now and is better than it is on windows using the same monitors. I have two 27" 4k monitors and I have been struggling with the font for a long time. No more.

    • shirro@aussie.zone
      link
      fedilink
      English
      arrow-up
      5
      ·
      edit-2
      14 days ago

      I don’t doubt you. Linux font rendering has been good enough for so long now that its surprising when people say its worse than some other system but I think it is still a reasonably common complaint so there has to be something to it. A lot of distros probably don’t have a very good font selection installed out of the box compared with proprietary systems and I am sure that plays a role.

      My desktop has a 38" ultrawide and the pixel density is a lot lower than your dual 4k monitors so I want to do everything I can for font rendering and your post has got me asking questions. I am in the process of configuring a minimal, low distraction tiling wm setup for a bit of fun (also another nvim conf spring clean). I hadn’t considered changing the font rendering defaults.

      I think I have all the fonts you list installed except for Hack. Inter is also a good one for UI. I don’t use Fira Code anymore for code/terminal but I keep it around. It is a nice code font with ligature support but it didn’t have an Italic variant and I like subtle use of italics in code and docs. Currently using Iosevka for mono but next week it might be something different.

      • penquin@lemm.eeOP
        link
        fedilink
        arrow-up
        3
        ·
        14 days ago

        I use segoe variable for the system and Jetbrains mono font for the terminal and and whatever the default that comes with jetbrains Rider. KDE plasma a ton of that Noto Sans font. Around 60 if I’m not mistaken. I’ve deleted a bunch of it with other languages that I don’t need (not sure if that’s a good idea, but it was annoying scrolling through all these fonts to find the one I want). Whatever Noto Sans that has a country name at the end of it I deleted it.

        • shirro@aussie.zone
          link
          fedilink
          English
          arrow-up
          4
          ·
          14 days ago

          Having comprehensive unicode language coverage on a free OS is amazing. I wish the font system was smart enough to hide Noto variants in creative apps but leave them available for browsers. There is a workaround to do that but its a huge pain. I wouldn’t delete any files managed by the package system. They will just keep coming back anyway. There are smaller collections of noto fonts in AUR that will satisfy the noto-fonts dependency which should keep KDE Plasma happy. They should be a straight swap if you are comfortable with an AUR dependency for a functioning desktop. The newer one is noto-fonts-main updated this year or there is an older noto-fonts-lite. Not tried either. Usual stuff about backups and taking advice from strangers on the internet.

          Segoe might benefit more from the embedded bitmap or autohint settings than the regular open source fonts I am likely to use. Microsoft would optimise the hell out of it to take advantage of their proprietary, patented font rendering system. I wouldn’t be surprised if it rendered poorly with distro defaults. Its the kind of blind spot a lot of open source devs and packagers could easily have. Its probably packed full of embedded bitmaps for small sizes and proprietary hinting stuff that linux won’t understand.

          • penquin@lemm.eeOP
            link
            fedilink
            arrow-up
            2
            ·
            13 days ago

            Man, this is nice. Having an actual productive conversation on the internet without the battle of upvotes and downvotes. Lol
            Anyway, I’ll watch the system and see if things are missing after removing those fonts. All what I removed was any

            noto sans + <a country whose language I don't speak>