• jballs@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    7
    ·
    edit-2
    2 months ago

    Any idea on what the measurements are on the Y axis?

    Edit: if you follow the link if shows the measurements are in kJ/cm2. Which is something someone smarter than me will have to explain.

        • Dave.@aussie.zone
          link
          fedilink
          arrow-up
          6
          ·
          edit-2
          2 months ago

          Look at the averages on that chart. Eyeballing it, the average should be around 70 kJ/cm2, currently it’s about 85.

          So it’s about 20 percent more energy.

          It doesn’t translate directly to temperatures as the values represent how much energy is in a column of water that is 1cm2 at the top, and that column extends down until the water temperature drops below 26 degrees Celsius.

          So it could be that the top of the column of warm water is mostly the same temperature as before but extends deeper, as opposed to the top of the column being a lot hotter than usual.

          When the column is shorter, a hurricane will mix it with cooler water lower down via wave action, reducing the amount of energy available after it passes by. This year the column of water is deeper than usual, which allows two hurricanes to develop over the same patch of ocean in quick succession.