Is your keyboard layout set correctly?

I would suppose so, cause I used nmcli d WiFi connect SSID password PASSWORD, and the PASSWORD is displayed correctly.

Does the SSID or password have a , or weird character?

My password is alphanumeric, so that shouldn’t be the issue. My SSID is alphanumeric + (), but I don’t think that’s the issue either cause I cannot connect to my password protected hotspot that is only alphanumeric.

Yea I tried, same issue

so don’t ever send anything you don’t absolutely have to.

Hmm I was thinking that after I’ve establish a base and was going to optimize, I think that setting the multiplayer nodes to be manually updated should be ok rather than having them done periodically, since a card game game state progress at fixed events rather than being real time.

but I generally personally prefer modifier parent nodes because the tree is very efficient and it seems to allow for more flexibility.

One downside with nodes that I noticed is that if we store the cards in the deck as nodes under a deck node, it becomes rather annoying to manipulate them, eg shuffle them, as compared to list. Would that be enough a drawback to reconsider using a list instead?

Or, maybe just tell them the JWT they’ve got is expired, and ask them yes or no if they want the new (current) price instead, and update it transparently if they say yes.

Based on this, it seems like you’re suggesting to move the logic closer to the frontend and leave the auto-refetching logic out of the backend?

The more I look at the responses, the more I feel this is a front-end problem to be solved rather than the backend’s.

I think the idea was that if they managed to get the private key, we have away bigger problems on our hands than them submitting fraudulent orders. Even with server-side tokens, the same could happen if someone get access to your machine.

Actually, we are controlling both ends. But the issue is that frontend have rather limited bandwidth most of the time (sadly the truth is that despite that your own team wants to make things clean, other teams may not have the same stance).

I think the idea was that as long as it is within 5 min, our service can be certain that the price shouldn’t change and thus we can save the computation cost of having to compute the price.

It also is a user requirement, cause within that 5 min, even if the price is supposed to be changed, we will still use the price in the JWT.

What are the alternatives to a JWT. I know it is a bit bloated and we could just use the HS256 signature itself, but that doesn’t really change the core problem of expiry vs auto-refetch

Oh, ticks are rare in my region, that’s why I have no prior experience with them.

I was thinking in the context of us slapping the mosquito would be equivalent to slamming a thumbtack into your skin which could increase the damage dealt and penetration depth.

Oh, I didn’t knew you can pass 2 is. I was depending on the tab completion from pacman, but I didn’t see that it says you could specify i’s

Ah, it worked. I thought Qi only works for packages that are already installed. Didn’t knew it worked for things that are synced as a new dependency of a package

ok, here you go https://pastebin.com/uPc5S1LU

Tried the settings on the GitHub, doesn’t seem to work, and it also made the stuttering worse

opengl-pbo=yes
opengl-early-flush=no.
video-sync=display-resample

ok, here you go

https://pastebin.com/uPc5S1LU

Yea, it seems to be using 200% CPU. But I have vo=gpu though, so I’d thought the GPU would’ve taken some of the load.

If I am strapped for CPU resources, how do I make it so that MPV buffer or something instead of dropping the audio when this happens? Cause it is strange the even though the visuals are acceptable, it is the audio that fails before the video

are you running it from a tty on login

Yea, directly on tty.

I imagine these are two separate issues.

I’d think they are related since mpv is working fine on Xwayland but not when I launch alacritty instead

Can you dump your installed packages with pacman -Qe and post it here? I’ll compare it to mine.

alacritty 0.12.2-1
ani-cli 4.6-1
archlinuxarm-keyring 20140119-2
base 3-1
base-devel 1-1
bat 0.23.0-3
cage 0.1.5-1
dhcpcd 10.0.2-1
dialog 1:1.3_20230209-1
linux-rpi 6.1.54-1
lobster 4.0.0-1
man-db 2.11.2-1
neovim 0.9.1-1
net-tools 2.10-2
netctl 1.28-2
noto-fonts 1:23.9.1-1
opendoas 6.8.2-1
openssh 9.4p1-4
pacman-contrib 1.9.1-1
raspberrypi-bootloader 20230921-1
raspberrypi-firmware 20230921-1
ripgrep 13.0.0-3
socat 1.7.4.4-1
tmux 3.3_a-7
vi 1:070224-6
which 2.21-6
wireless-regdb 2023.09.01-1
wireless_tools 30.pre9-3
wpa_supplicant 2:2.10-8
xorg-xwayland 23.2.1-1

That shouldn’t be the problem since I’m using pipewire and it is working in the Xwayland session. When I launch into alacritty, I also checked that pipewire + wireplumber were both active

I tried with cage + Xwayland and that works perfectly, so I highly doubt that is the issue. Maybe it is something to do with cage + alacritty that is causing it, but I’m not too well versed in the Wayland stuff to know if spawning a terminal application may somehow not support audio.

I think there’s a spectrum here, and I’ll clarify the stances.

The spectrum ranges from “Data shouldn’t cause the function to do (something wildly) different” to “It should be allowed, even to the point of variable returns”

I think you stand on the former while I stand on the latter. Correct me if I’m wrong though, but that’s the vibe I’m getting from the tone in your example.

Data shouldn’t drive the program in this way.

Suppose we have a function that calculates a price of an object. I feel it is agreeable for us to have compute_price(with_discount: bool), over compute_price_with_discount() + compute_price_without_discount()

You’ve basically spelled:

I feel your point your making in the example is a bit exaggerated. Again, coming back to my above example, I don’t think we would construe it as compute_price('with_discount').

Maybe this is bandwagoning, but one of the reason for my stance is that there are quite a few examples of variable returns.

eg:

• getattr may return a different type base on the key given
• quite a few functions in numpy returns different things based on flags. SVD will return S if compute_uv=False and S,U,V otherwise

I thought about it, but it isn’t as expressive as I wished.

Meaning if I do

a = foo(return_more=True)
or
a, b = foo(return_more=False)

it doesn’t catch these errors for me.

In comparison, the other suggested solution does catch these.

yea, this is pretty close to what I’m looking for.

The only missing piece is the ability to define the overload methods on the bool

something like

@overload
def foo(return_more: True) -> (Data, Data)

@overload
def foo(return_more: False) -> Data

But I don’t think such constructs are possible? I know it is possible in Typescript to define the types using constants, but I don’t suppose Python allows for this?

EDIT: At first, when I tried the above, the typechecker said Literal[True] was not expected and I thought it was not possible. But after experimenting some, I figured out that it is actually possible. Added my solution to the OP

Thanks for the tip!