• Pxtl@lemmy.ca
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      11 months ago

      I’m aware but I haven’t heard people’s experiences with them. I ask because I’m shopping for water heating right now and debating the expense of getting 240 run to the water heater for a heat pump.

      Electric tankless sounds impossible (yes, I know they exist, I just mean they don’t sound like something that should be able to), since the amount of BTUs required to run a gas tankless at peak is absolutely nuts – tankless gas water-heaters run on 3/4" pipe instead of the normal 1/2" since they need to have so much burst heat. That doesn’t sound possible for electric.

      • Kecessa@sh.itjust.works
        link
        fedilink
        arrow-up
        3
        ·
        edit-2
        11 months ago

        What kind of usage do you have? We’ve got a 120v 40 gallons tank at our cottage and it’s more than enough for three showers, worst case it takes about an hour to heat the whole tank. My father in law has an 80 gallons unit and he’s never ran out of hot water even with people visiting.

        I don’t understand how people cannot believe that heating things with electricity works well, it’s the norm in Quebec (and anywhere where electricity is cheap really).

        • Auli@lemmy.ca
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 months ago

          Sure where it’s cheap here it would cost more to move to electricity. Yah Alberta Advantage /s

          • Kecessa@sh.itjust.works
            link
            fedilink
            arrow-up
            1
            ·
            11 months ago

            My point was more that “Yes, heating your house and water with electricity actually works, the proof is that it’s the norm in many places!”

            It might be cheaper in Alberta for now but the consequences of heating with petrol will be more expensive in the long run, so it’s just shoveling the problem forward…

      • pbjamm@beehaw.org
        link
        fedilink
        English
        arrow-up
        3
        ·
        11 months ago

        A whole house model will need a 100A circuit to itself. You could install small units in each location that needs hot water but that is also expensive.

        • Pxtl@lemmy.ca
          link
          fedilink
          English
          arrow-up
          3
          ·
          11 months ago

          Holy crap like 24000W of juice on tap. That is not screwing around. Awesome. A neat option but sounds like something for new builds not retrofitting an older home.

          • pbjamm@beehaw.org
            link
            fedilink
            English
            arrow-up
            3
            ·
            11 months ago

            If you have 200a service to your house then it might be an option but lots of houses (including my own) do not have the capacity.

            I really need to upgrade to 200a or get gas heating as my 100a is woefully inadequate when temps are below freezing like now.

          • Victor Villas@lemmy.ca
            link
            fedilink
            arrow-up
            3
            ·
            edit-2
            11 months ago

            If you already haven’t, do check out Technology Connections videos on electrifying, he covers old home challenges quite a bit.

            I was reminded of him because he talks about the possibility of making a 100A circuitry workout with some smart switching

            • Pxtl@lemmy.ca
              link
              fedilink
              English
              arrow-up
              1
              ·
              edit-2
              11 months ago

              Yeah I love his videos but I hadn’t seen anything about the whole home issue of “omg this is way more power hosue-wide”.

              The idea of smart switching sounds neat - that would basically mean “you can’t run your dryer and have hot water and charge your car at the same time”, right? But, like, in an automated way not just “it throws the breaker”.

              • Victor Villas@lemmy.ca
                link
                fedilink
                arrow-up
                1
                ·
                11 months ago

                Pretty much yes, a contraption to make sure you don’t surpass your amps without worrying about having it all plugged in

          • pbjamm@beehaw.org
            link
            fedilink
            English
            arrow-up
            2
            ·
            10 months ago

            I mean you could look it up

            A pool and a shower are different applications. If the pool takes all day to warm up it is not much of an issue, but you want the shower to be hot right now.

      • ikidd@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        11 months ago

        People that cheer about tankless have never had a tankless. They’re awful. They can’t hold a temperature and are a great way to get scalded then frozen. Tanks are very efficient these days and have none of the usage downfalls, besides being a quarter of the cost.

        • joshhsoj1902@lemmy.ca
          link
          fedilink
          arrow-up
          3
          ·
          11 months ago

          A properly sized natural gas tankless works pretty well.

          Electric tankless on the otherhand take so much power I can’t imagine anyone actually installs them in a home.

        • DerisionConsulting@lemmy.ca
          link
          fedilink
          English
          arrow-up
          1
          ·
          11 months ago

          I have a gas tankless, and it works really well. When we moved in, I needed to turn the temperature down to prevent the issue you described; It was set at 65C.
          Tankless systems should be set to 50C/120F, whereas tank systems are supposed to be hotter to prevent Legionnaires’.

        • AnotherDirtyAnglo@lemmy.ca
          link
          fedilink
          arrow-up
          1
          ·
          10 months ago

          I’ve had a 50A unit in a 1BR apartment, and it was fine. Enough heat for showers and for someone to do dishes in the kitchen, or the dishwasher to run. You’d need the larger unit for a home with two showers and four people, but in some use cases, it’s really efficient.