This may be OT since strictly speaking it’s about hardware… I trust it is ok to post it given the spirit of the community, but have my apologies and feel free to remove it if it’s not.

I’m looking to replace my old Bose QC25, since they have recently died (after a long a fulfilling life), but it seems everything nowadays is bluetooth (which I don’t mind) and require some proprietary app to turn ANC on/off (which I do mind… are physical buttons/switches become too expensive to include in your overpriced earbuds?).

Anyway… do you know of any headphones/earbuds that meet the following?

  1. can be powered via wire or have batteries that last 12+hrs (long-haul flights)
  2. have decent noise cancelling
  3. don’t require me to install a apps or can be used with some open source app (possibly with full functionality and straightforward to setup)
  4. are not overly expensive (I have to buy 2 pairs and I’ll only use them a few times a year when I fly)
  • PeachMan@lemmy.world
    link
    fedilink
    arrow-up
    12
    ·
    edit-2
    1 year ago

    Holy crap! Thanks for making this thread, I learned that GadgetBridge works with my Sony WH-1000XM3 headphones. Confirmed that all the same settings from the Sony app are in there, and I can turn ANC on and off. I’d argue that you should probably install the official app sometimes (maybe once a year) to check for firmware updates, and then just uninstall it after updating. But this GadgetBridge app seems perfect to me.

    screen

    shots

    • HeavyRaptor@lemmy.zip
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I recommend you also check out the Sony LinkBuds S. Cheaper than the 1000XM3 and usually a better fit for people as they are smaller and lighter while still offering ANC.

      • PeachMan@lemmy.world
        link
        fedilink
        arrow-up
        5
        arrow-down
        2
        ·
        1 year ago

        Hard disagree. ANC of earbuds just isn’t in the same league as a nice set of big over-ear cans. And earbuds that go inside your ear canal may or may not fit well depending on how your ear canal is shaped. Also, my big headphones are VERY repairable, unlike little earbuds. I bought these things used and have replaced a faulty power board and the battery in them that eventually went bad, all with a screwdriver. No soldering required.

        I’m sure the LinkBuds are nice, but I want to push back hard on the idea that earbuds are inherently better. There are pros and cons.

        • Bartsbigbugbag@lemmy.ml
          link
          fedilink
          arrow-up
          2
          ·
          edit-2
          1 year ago

          The wf-1000mx3 are earbuds, and they have some of the best noise cancelling on the market… or did when they came out. I guess they are a few years old now, but it’s significantly better than any non-Sony ANC I’ve ever used, headphone or earbud.

          • PeachMan@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            1 year ago

            I’m sure they compare favorably to other earbuds. But their form factor means they’re inevitably going to have inferior ANC to the flagship over-ear headphones from Bose and Sony. Those would be the QC-45 and WH-1000XM5 headphones at the moment.

            It’s why you don’t see them directly compared very often; they’re in different leagues and there’s really no contest.

        • HeavyRaptor@lemmy.zip
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I thought you were talking about the WF-1000XM3, which ARE earbuds (but I had to look up the difference, WF-1000 or WH-1000). Thanks Sony for naming things almost the same.

        • Hydroel@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I’ve looked if I could do it myself as well, but there’s basically nothing but “look at how it’s done on similar devices”. It’s fantastic to build an app to support all those devices, but it’s a bit of a shame not to provide guides so others can contribute to support it.

    • PeachMan@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      edit-2
      1 year ago

      Oh shit, they support Galaxy Buds Live. I love those little things, I might try this out.

      Edit: to be clear, ANC on these buds is terrible. So they’re definitely not an answer to OP’s question, but they’re the most comfortable earbuds I’ve ever used.

      Edit 2: and they support my Sony headphones! Holy shit! OP, there’s your answer, assuming they support the ANC button. My XM3 cans have noise cancelling just as good as Bose (I’ve tested).

      • badelf@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I have XM4. Supports everything except DSEE as far as I can see. Oh. Not the stuff that links to Sony either like 360.

  • pruneaue@lemmy.blahaj.zone
    link
    fedilink
    arrow-up
    11
    arrow-down
    1
    ·
    1 year ago

    Why not just go with some classic wired closed backs (ex: audio-technica ath-m50x)? They tend to keep a lot of noise out. If ANC is a must, i cant really suggest anything as i find most implementations annoying, but im sure there are wired headphones with ANC.
    Seems like going wireless would limit your options A LOT with that 12h requirement

    • AgnosticMammal@lemmy.zip
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      You can also increase the passive noise cancelling by replacing the earpads for felt / velour or fabric lined ones, though bear in mind it will also affect the “feel” of the sound as it reacts differently to the stock PU leather.

    • Hydroel@lemmy.world
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      1 year ago

      Maybe OP works in noisy environments, or his device is a recent phone which doesn’t have a jack input and using a adapter is not very convenient?

      Anyway, passive noise cancellation (typically, a closed back or in-ears) is more efficient in the higher frequencies: physically blocking short wavelengths is a lot easier, as any obstacle will act as a dampener. On the other hand, ANC is a lot more efficient on lower frequencies (on the opposite, it’s easier to be precise on lower frequencies, longer wavelengths). On ANC devices, both are used in tandem. And I don’t know if you’ve tried any good, recent ANC headphones these last few years, but they’ve become surprisingly good! Nothing to be compared with passive noise blocking.

      but im sure there are wired headphones with ANC

      I’m sure there are (although I don’t know any), but ANC requires digital processing, which is performed by the headphones itself on the signal. If you’re plugged in with a jack, that means you’ll be needing a digital-to-analog-to-digital conversion, which is objectively a loss in quality, which would have to be handled by the headphones… Besides, ANC headphones usually have several modes which can be selected from the app. Anyway, all that to say that now that we have quite to very good Bluetooth audio codecs, there’s no real upside to having a wired connection for ANC headphones, which is why most makers have moved to that.

  • fri@beehaw.org
    link
    fedilink
    arrow-up
    8
    arrow-down
    1
    ·
    1 year ago

    I personally use two pairs that satisfy most of your criteria:

    • Jabra Elite 85t. You switch between ANC/passthrough by double-clicking the right bud; it doesn’t need the app to do that. However, if your 12 h requirement is about consecutive hours, they won’t work (buds last about 5 h, plus 20 h from the case). They’re pretty compact and the case is magnetic, which I really like (coming from 65t model).
    • Sony WH1000XM5. Insanely good ANC and nice battery life. There’s a physical button on the left cup to toggle between modes, which I believe are set to ANC/passthrough by default. The app lets you add a third mode (off), so you don’t need it at all.

    I had a similar approach about headphones as you had - I only planned to use them for work, specifically Teams meetings in a loud office. But XM5s have such great ANC and sound quality that I now commute and travel with them.

    For gaming, I’m using HyperX Cloud Alpha Wireless. They have an unbelievable 300 hours battery life and decent passive noise canceling, though no ANC. They’re using a proprietary wireless connection, making them fit for gaming without noticeable lags (Bluetooth sucks in this regard, I can’t play with 300 ms audio delay). Not sure if you can connect them to a phone.

  • thalience@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    Pine64 sells ANC earbuds that (for the factory firmware) doesn’t have a companion app at all.

    • Guest_User@lemmy.world
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      1 year ago

      Do yours have active noise canceling? If so, please let us know which you have as that may help answer OPs question

      • Possibly linux@lemmy.zip
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        2
        ·
        1 year ago

        Actually, I currently have the pine64 pinepub pros. I would recommend them but they take a long time to arrive and aren’t polished for the everyday consumer.

        I personally would just go to the store and buy the off brand earbuds. They may not have good anc but you can always return them.

        I also would look at the recommendations in other comments.

  • GenderNeutralBro@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    I wasn’t aware that any required an app. Weird!

    I have a pair of Sony XM2s. While Sony does have an app, it’s not necessary for ANC. You only need the app to do ear shape analysis and atmospheric pressure adjustment – neither of which seems particularly important to me after using it for a few years.

    From a quick review check, it looks like the latest one (XM5) is similar. From https://www.soundguys.com/sony-wh-1000xm5-review-71783/ :

    Pressing the NC/AMB button will toggle the ANC mode. You can select either ANC, ANC off, or Ambient sound modes

  • Echo5@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    1 year ago

    Soundcore by Anker Life Q20+ headphones have been good to my family. Seventy bucks, has a detachable aux cord (wired only does normal though, no ANC), stellar battery life even with ANC, microphone, has normal and pass-through modes in addition to ANC, and a nice protective bag. I used them for months as regular headphones attached to my computer. The ANC is not the end all be all but definitely helps with plane noise, I could hear flight attendants much easier.

    Edit - and no app required whatsoever!

  • SolidGrue@lemmy.world
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    This is admittedly not the answer you’re looking for, but the Bose QC35 only needs the app to program the assist button on the left pad, specifically to toggle it between activating the voice assistant, or to toggle noose cancelling mode.

    You could probably even program the button on some other device, and then either pair it to your phone or use it in analog mode.

    Kind of annoying, I know. The app is riddled with trackers but you could leave it disabled for when you need it, and only enable it when the phone is in airplane mode.

    I’m only shilling for Bose because I have a pair and I think they’re great headphones, but I don’t much care for their app.

  • N4CHEM@lemmy.ml
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Soundcore Q20 and Q30 have a physical button with no need for an app, I don’t know if their newer models are still like this. The Q30 also have a proprietary app to configure some things (like EQ), however a big plus here is the existence of an open source app on IzzyOnDroid’s repo that can also do this.

  • 3l3s3@feddit.de
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 year ago

    Sony’s headphones at least up until the xm4 let you enable anc via long press of a button, not sure if they last 12 hours though

  • jacksilver@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Jabra is a good brand for headphones and earbuds. All the headphones I’ve gotten have aux support and buttons on the headphone for all the features.

    • wizardbeard@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Can confirm, I have a Jabra Evolve 65 with AMC built in, controlled by physical button. Only app I’ve used for it is on PC to update the headset and (optional, headset also works as pure bluetooth) dongle firmwares.

  • unmagical@lemmy.ml
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    The Microsoft Surface headphones have a spinning dial on one ear that allows you to set the specific amount of ANC you’d like.

    They have an app, but it’s only used for firmware updates and changing the action button. You don’t need the app at all ever if you don’t care about those.

    The ANC was not as good as my Sony’s, but I can’t change the ANC on the Sony’s without an app.

  • SuperSpruce@lemmy.ml
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    I currently use Monoprice BT-600ANC headphones. They’re not too expensive and the ANC punches way above its price class, can be used with a wire if you want, have great battery life, and most importantly don’t require an app.