TLDR: Currently and historically, American manufacturers are very good at making big power from big engines to make big cars go big fast in a straight line. When the market needs suddenly shifted in the ‘70s, American reliability and power output dropped drastically, and Japanese automakers were already there with efficient and reliable cars to fill the gap. They maintained that reputation through today, while American reliability was extremely poor for a few decades, and has stayed spotty for a long time. The European cars imported to the States have generally had a focus on luxury and innovation, leading to more expensive and less reliable vehicles as well.
Long answer:
Toyota was the first Japanese automaker to sell cars in the US in 1958 and has pretty much always had a focus on
over engineeringmanufacturing their vehicles in such a way as to be exceptionally reliable. They weren’t super popular, but became known for being reliable and easy to fix and maintain. (@MargotRobbie and @LordOfTheChia both go into better detail on this engineering philosophy beneath this comment)In 1973 OPEC put an oil embargo on the United States and other countries that supported Israel. This drove oil prices through the roof and the market shifted from wanting big, flashy, and powerful “American muscle,” to needing cars that could do better than 4 miles per gallon. In addition, the US government started requiring more and more emissions and efficiency controls on cars being sold.
American manufacturers struggled to adapt their existing platforms to be more efficient while Japanese companies like Toyota and Honda had already been building simple and efficient cars for years. When the Japanese economy started booming and more of their manufacturing was moved to the States, the cost to purchase and maintain a Japanese car decreased further and led them to be even more popular.
American automakers of the time were already huge corporations with lots of complacent “old guard” executives who thought people would “buy American” just by virtue of them being American. Because they couldn’t pivot very quickly (or just didn’t want to) American cars of the time swiftly became hot garbage. Increased emissions restrictions and a lack of innovation led to underpowered, over complicated, and unreliable cars that were just as expensive, and often more expensive than their Japanese competitors.
This didn’t reeeealllly start to change until big boss dawg Lee Iacocca, then CEO of Chrysler, ordered the development of the Chrysler K Platform which released in 1981. (Incidentally, the wiki on the K car provides some good insight into your question as well: https://en.wikipedia.org/wiki/Chrysler_K_platform ) But by this time the reputation damage to American cars had already been done and “Japanese” became synonymous with economical and reliable in American culture. (Think of that scene in Back to the Future Pt. 2 where 1955 Doc is all disgusted at the “made in Japan” stuff and Marty says “all the best stuff comes from Japan!”)
Another big factor is that Japanese automakers continued to produce comparatively cheap, reliable, high quality cars which solidified their good reputation while American companies remained spotty. There are some exceptions to the rule (GM’s LS and Vortec 4300 engines are widely regarded as “bulletproof.” American medium and heavy duty trucks were mostly exempt from emissions restrictions so were still high quality, etc.) but in general, you can buy any Toyota or Honda in their lineup, past or current, and sleep comfortably knowing it is probably going to last. If you’re buying American, you generally have to pay more attention to the individual reliability stats of the vehicle model and often even sub-model (different engines, transmissions, and such).
In regards to European cars, it generally doesn’t make a whole lot of economic sense for them to import cheap cars because import costs mean slimmer margins and our economy class market is just too competitive. That means they typically market themselves as luxury vehicles, and/or put themselves into a specific niche. (e.g. Volvos are the safest, Mercedes is the most luxurious and innovative, BMW offers the best driving experience, etc.) Because of that, we get fewer of the cheap, “tried and true” models from European brands and more of their fancy new stuff. Stuff that is new and fancy costs more to maintain and repair. Parts are more expensive and it can be difficult to even find someone who knows how to fix the car properly. Because European cars are more expensive and difficult to maintain, lots of people just don’t. When they don’t perform maintenance, the cars break. And when the cars break, they’re even more costly to repair. This leads to the general perception that European cars are more expensive and less reliable.
There’s also a general culture perception component as well, fair or otherwise… e.g. Americans see Germans as innovative, but with a tendency to over engineer things to a fault; Italians as passionate, but more focused on performance and aesthetics over functionality; and the Japanese as fastidious and hyper concerned with quality of reputation. These stereotypes are also applied to the goods they sell in American markets.
So at the end of it all, it really boils down to costs to purchase and maintain the vehicle, each manufacturers market niche, and the general public’s perception of the foreign culture, accurate or not. There is a general accuracy in thinking that Japanese cars are more reliable, as that is the focus of their more prominent brands, but there are always exceptions.
Thanks for coming to my LEM talk.
(edited for way too many commas and some other grammar)
I’d like to expand a little bit on the reason for quality on the Japanese side: At the end of the war, Japan was very low on resources and could not maintain large manufacturing lines with great inventory as typical of the mass production process innovated by Ford at the time, which forces them to maximize efficiency and minimize waste, both in terms of material as well as time. The Toyota Production System, or Lean as now it is known, was codified based on some core principles such as “minimize waste through continuous process improvement” and “automation with a human touch”, which allowed them to have great advantages in both efficiency and quality over the American manufacturers at the time.
I do disagree with your statement that Toyota quality was because of they “over-engineer” their product, but rather, something that is near opposite is true: Toyota is known to be very conservative with innovation and very much prefers to use tried and true reliable parts than make radical changes, that and the fact that they are the gold standard for manufacturing efficiency means that their defect rate will be very low. So, I don’t think their products are shaped by their culture, but rather their culture is shaped by their products.
Thanks for the insight! I’ve learned a little more about Toyota’s process specifically in this thread, which is cool.
I would argue that “over engineer” in my original context is more in the sense that aircraft are “over engineered” to be reliable beyond normal operating parameters. American cars at the time were generally built with like 100k miles in mind before needing a rebuild. Then Toyota comes rolling in with engines that can do 3-4 times that no prob. So Toyotas are “over engineered” in the sense that “these engines go above and beyond what other manufacturers consider acceptable.”
But I agree that there’s maybe some better terminology to be used because when I think of “over engineered” in context of cars, I am mostly thinking of things like, “Okay, I get that maybe you eek out a teeny bit more efficiency, but putting the water pump under the manifold where it can leak into the block seems like a really bad idea.” I’ve updated my comment to reflect that, open to suggestions haha.
I would really recommend reading Riker’s “The Toyota Way”, it’s short but excellent read, although a bit self-congratulatory at times about the success of NUMMI.
When I think about the word “Over-engineered”, it usually refers to something like Juicero that adds unnecessary complexity to a problem solving approach, and good reliable engineering is the exact opposite of that. A minor example of that applied to a car engine is the turbocharger, it greatly enhances the efficiency of the fuel intake by forced convection, however the added complexity made it less reliable.
And the other thing to note that is that aerospace products are less reliable by necessity as their Factor of Safety never really go past 1.2 due to weight requirements, whereas you typically want the Factor of Safety of a normal design to be in the 2-3 range.
If I recall correctly, Toyota’s Lean strategy was quite influential in operations management and continues to influence today. Six Sigma and Agile Scrum both have a lot of credit to give to Lean.
Bro wrote a whole essay. I enjoyed it good job
One point I would make, is that Japanese manufacturers focused on “continuous improvement” (Kaizen):
American managers believed that once a production system achieved stability, it should be maintained at that point. Japanese managers, on the other hand, believed that production stability was just a starting point, and from that point onward, the continual improvement must be applied.
The Japanese also believed in a harmonious relationship between managers and workers. That too was contrary to Detroit’s historic adversarial relationship between management and labor. Japanese managers actively encouraged all workers to suggest ways to improve processes. Detroit’s managers adamantly prohibited workers from suggesting changes.
Edit: A better source on the Kaizen method
https://en.wikipedia.org/wiki/Kaizen
It is also a process that, when done correctly, humanizes the workplace, eliminates overly hard work (muri), and teaches people how to perform experiments on their work using the scientific method and how to learn to spot and eliminate waste in business processes.
Great response! I hope to see you at the next LEM talk.
In the US, there is a consumer magazine Consumer Reports. This magazine is published by a non-profit who takes no advertising dollars and pays full price for anything they review so as to avoid any appearance of bias. Every year, CR sends out a survey to all of its members (8 million+) about the cars that they own, asking specific questions about problems & repairs their cars have had over the last year. They aggregate this data and present it as reliability ratings. In the past, Japanese cars have had overwhelmingly better reliability ratings than US cars. I recall in the late 90s / early 00s US cars rarely did better than the middle value of their 5 bubble scale for overall reliability, while Japanese cars almost always got the top value. (German cars also rated highly for reliability as well, but are much more expensive in the US than Japanese imports)
The difference may no longer be as large or uniform, but this is certainly where the generalized view came from.
IIRC though, American manufacturers have cut the distance to the point where it’s nearly negligible in some categories.
I did edit to add a note to that effect. I think the perception continues due to that long established history.
They’re considered to be more reliable because they are. Simple as that.
deleted by creator
This is it, Toyota/Honda built that reputation and mostly still live up to it.
I’m currently car shopping for a recent model year sub-compact crossover SUV.
I was perfectly willing to evaluate vehicles from all manufacturers. Part of my search also includes looking up the available models on JD Power reliability ratings, consumer reports, and other testing agencies, and what I’m seeing is that the US-made vehicles in this category have reliability ratings that are significantly worse than the reliability ratings for the Japanese models.
Since I don’t have the money to go out and buy one of everything, I’m forced to have to accept the findings of other 3rd parties who do the evaluations.
So to answer your original question: Japanese cars actually are more reliable that US cars based on the conclusions of objective test results. There’s no “considered to be” about it. It’s not a matter of subjective feelings on the issue.
May I ask what you ended up choosing and what some of the runner-ups were?
I was looking for the same thing just recently! I ended up choosing a 2023 CX-30 Select. The other options I had considered were the mazda3 hatchback, Toyota CH-R, and Subaru Impreza. All Japanese, but that’s not by accident.
One reason is a specific manufacturing process known as Kaizen. Here is a quick blog I found that describes it.
Kaizen, or “continuous improvement” is a process within the full method of “lean manufacturing” made by Toyota, which Agile is derived from if you tech friends here are familar with that. I think waste reduction techniques like JIT inventory management and kanbans are probably more relevant to the car quality discussion.
I’m driving a 21yo Nissan here in Germany. No VW for me, thanks.
Man, I’m driving a 20yo VW here in the US. If I were driving a Nissan instead, just how old would my car be??
Well, if we assume seven Nissan years for every VW year…. ;)
I just noticed that in general the Japanese make good quality products and they put a lot of passion into a lot of things they do. Car manufacturing included, I suppose.
My dad has a 14-year old Mitsubishi and it’s had zero problems except when the brakes broke once (it was fixed easily though). It’s in almost perfect condition.
There is a long and very simple history here. Japan had an entirely different assembly process from the US when they started making cars and simply were at first universally more reliable than all American cars, by huge margins too, for many decades. This is not as true as it used to be but still holds in some cases and has been true for so long that it is accepted as true.
Me, planning to go to the service with my almost 6 years old Honda, for the first time outside the scheduled inspections (to replace break pads) vs my friends replacing engine in a 4yo French car, and faulty suspension in a 6yo German car…
No idea… It is a mistry!
Because my japanese car is more reliable that my other cars :P
Depends somewhat on the brand, but for something like Toyota or Honda, it’s because they really are just more reliable and more easily maintained on average. Nissans or Mazdas, not so much (especially Nissan).
Nissan engines seem to be really reliable. The CVT transmission is hot garbage but really, anything with a CVT is. I’d take a Nissan (without CVT) over any GM or Ford 4 banger. (not including the 2.0 turbo and that new truck 4 banger, haven’t seen enough of those to determine if they’re crap or not)
Is that true? I’d say in the UK the most reliable brands are generally considered to be European. e.g. Volvo, VW, BMW.
It’s definitely true in the States. Due in part to import costs, we don’t get many of the bare bones reliable models from pretty much anyone but Volkswagen. Other European brands either don’t manufacture in the States, or only manufacture a small range here. For example, Mercedes-Benz and BMW pretty much only manufacture SUVs here because we can’t get over huge ass cars, so it makes more sense to make those here since we buy so many. But our economy class market is too competitive for the good cheap Euro stuff. Additionally, Americans automatically assign European brands a level of prestige, which they want to maintain, so we get the fancy over-engineered stuff that costs a lot to maintain and fix.
Interesting insight, thank you.
Have a European car and a Japanese one, one is 6 yrs old, one is 8. The Japanese one has only got regular service so far with no additional work done, besides a battery change at year 4. The European one, I have changed small obscure electronic parts to rebuilding the engine head from a donor engine, that essentially cost 1/5 of the insurance value of the car. The European one rides well, is nicely tuned, but I am going all jap in my next change lol.
European car parts are also about 3 times the cost of the Korean ones, and at least double of the Japanese ones, so servicing the car in the company workshop costs about 3 times as much as servicing an Asian car (in my country). If your country has a good service network for Japanese cars, like a Toyota, Honda or Suzuki, consider them, the total cost of ownership can be much lower in my opinion. If your country doesn’t have that advantage, then the point is moot.
There’s a big difference between European brands though.
French and Italian cars, for example, are generally not that reliable. However, BMW’s (German) are known to be quite reliable. Same goes for Volvo.
BMWs outside their warranty go for almost a tenth of their new cost.
I think Volvo gets overlooked when discussing cars and reliability.
The best way to get a quick understanding I think is to listen to episode 561 (2015) of This American Life about NUMMI in California:
https://www.thisamericanlife.org/561/nummi-2015
Toyota was more or less forced to start building cars in the US in the early eighties and did so in an unlikely joint venture with General Motors. GM was very interested in learning how Toyota build their cars. Bottom line: the Toyota Production System or TPS is mostly a way of management thinking that is completely different from the way most companies in the world manage people.
It is based on trusting employees, enforcing employees by training them, allowing employees to report errors as soon as possible, viewing the production proces as a manager with your own senses, understanding the production proces, truly following a vision and more.
Toyota actually does what most managers learn in management schools but don’t practice. Most managers outside Toyota want to be a boss and not a leader. But Toyota wants leaders that are being followed by employees based on intrinsic values.
Interestingly, the Toyota Production System is heavily influenced by the Training Within Industry program developed by the US Army during WWII and taught in post-war Japan by the US. And statistician W. Edwards Demming who showed Japan what true PDCA looks like.
Although an initial success, the production plant ultimately stopped operating. It was purchased by Tesla, and AFAIK, as of today Teslas are being build in the same plant in Fremont. But I highly doubt TPS is used to build Teslas.
