Not having a switched light source makes some sense as most of the rooms in my house had ceiling fans without lights installed, which we switched to fans with lights. There was an extra switch for the light in the ceiling fan that didn’t do anything until we put it in. The switches did go to the lower plug on a couple of outlets, which was fun to figure out since we hadn’t come across it before!
We also have one switch that goes to an outlet about eight foot up on a wall that I assume was for some decoration to make it easier to turn on and off.
You, ceiling fan outlets count for that requirement, though it’s entertaining when people install a fan without a light and wonder why their switch doesn’t control a light lol. Any time I install a ceiling fan outlet, we always run a 3(+ground) wire cable, two switched power legs, for independent control of lights and fan.
I am so glad they wired it for a potential future light separate from the fan!
They sure skimped on a bunch of other stuff though, like a couple bathroom lights don’t have proper mounting boxes because they didn’t put a 2x4 in the right place and are just mounted to the drywall.
Yeah that happens sometimes, although there is a possibility that a previous owner added a switch after the fact, and had to install a larger box. Some guys will screw a nail-on box to the original mounting stud, but it’s just as easy to add an old work box (the ones with the mounting wings) and call it a day.
Not having a switched light source makes some sense as most of the rooms in my house had ceiling fans without lights installed, which we switched to fans with lights. There was an extra switch for the light in the ceiling fan that didn’t do anything until we put it in. The switches did go to the lower plug on a couple of outlets, which was fun to figure out since we hadn’t come across it before!
We also have one switch that goes to an outlet about eight foot up on a wall that I assume was for some decoration to make it easier to turn on and off.
You, ceiling fan outlets count for that requirement, though it’s entertaining when people install a fan without a light and wonder why their switch doesn’t control a light lol. Any time I install a ceiling fan outlet, we always run a 3(+ground) wire cable, two switched power legs, for independent control of lights and fan.
I am so glad they wired it for a potential future light separate from the fan!
They sure skimped on a bunch of other stuff though, like a couple bathroom lights don’t have proper mounting boxes because they didn’t put a 2x4 in the right place and are just mounted to the drywall.
Yeah that happens sometimes, although there is a possibility that a previous owner added a switch after the fact, and had to install a larger box. Some guys will screw a nail-on box to the original mounting stud, but it’s just as easy to add an old work box (the ones with the mounting wings) and call it a day.