Is there a way to turn off incremental search? Either Web UI or apps: search seems to send a search instruction to server for every new letter added to the search box. I’ld much rather type a few letters (I usually sort of know what I’m looking for) and then click send or whatever to fetch results only for that. Would improve performance a lot for me

  • deegeese@sopuli.xyzEnglish
    3·
    2 months ago

    I’ve never had a performance problem with this.

    I wonder if your server is very underspecced or if your client has really bad network latency.

    • freebee@sh.itjust.worksOPEnglish
      2·
      2 months ago

      Server is Raspberry pi 3 B with 1TB SSD.

      Rpi temp idle is ~49°C, gets to about ~65° when being queried, etc. ~75° during initial library scan

      Was a osmc install (which as I understand is a minimalist debian ?), installed jellyfin, disabled mediacenter (kodi) on boot. It’s all on home wifi still… Only about 1700 albums of music and audiobooks, no movies no series. Perhaps the wifi chip in rpi isn’t good enough?

      • deegeese@sopuli.xyzEnglish
        4·
        2 months ago

        My guess would be that a Pi 3 is good enough for serving menus and files, but is struggling to keep up with real time search. The bandwidth needed by search is minimal so I would only suspect networking if you were over some remote, mobile connection.

      • Chewy@discuss.tchncs.deEnglish
        1·
        2 months ago

        Is your Jellyfin database on the PI’s microSD or on the SSD? Maybe the SD isn’t fast enough (although I’m also not sure whether an USB SSD performs better).

        • freebee@sh.itjust.worksOPEnglish
          1·
          2 months ago

          It’s on the SD. It has gotten better tho. I’m guessing things were perhaps still being sorted in background.

      • mearce@programming.devEnglish
        1·
        2 months ago

        How well does your rpi keep up with transcoding? I have some 3bs laying around but I had assumed they wouldn’t handle jellyfin too well?

        Edit: Reread your comment, you don’t have movies or tv shows. But out of curiosity, have you tried?

        • freebee@sh.itjust.worksOPEnglish
          2·
          2 months ago

          I will try that in a few days ;)

          I’m assuming it will be okay-ish, as long as its 720p or lower and not super compressed and only 1 client connected. Ordered a tiny 3.3V rpi fan, it might help. Or make things worse as it drains some power, who knows.

          Used to have kodi on this rpi for a few years, until about 4 years ago. Only local tho, not as server. It struggled hard with playing HVEC. Visibly (annoyingly) lagging. Older filetypes worked very fine.

          If it sucks, I can still use it as server remote through vpn, download something, play locally.

          Only music jellyfin has somewhat stabilised now. Got 48h without crashing! Think internet connection somehow gets stuck sometimes. Quite certain it’s not a RAM, not a temp and not a SSD issue. Gonna put a cron script to regularly check connection, if down to long, reboot. That might “fix” it well enough to be usable longterm, local+remote.

          Got it going remote too, can listen to my jellyfin on any network now, with the Nordvpn meshnet it’s really easy to set up and presumably that’s secure too.

        • freebee@sh.itjust.worksOPEnglish
          2·
          2 months ago

          In case you’re doubting about doing it: do it. It’s fine.

          But don’t make the mistakes I made :')

          1. don’t “recycle” an old microSD with osmc or some other system still on it. Start from scratch.

          In fact, I bought a new SD card. 32 GB costs a ridiculous 7 €. It’s worth not taking the risk with some old one that’s possibly been flashed many times before. I’m quite sure some blocks on the one i was using previous were corrupted.

          1. don’t use raspbian, osmc, debian, … Use DIETPI. Possibly raspbian lite. It’s the absolute minimal system you can get, with a focus on home-servering whatever you want on a rpi. This is the way. It’s disabling sending power to whatever is on there that you’ll never be using anyhow. Including the option to fully disable local hdmi output, absolutely no local audio-out support, etc. Squeezing all these little ones for sure pays off on a rpi 3 or older.

          2. video streaming works fine! Better than local video playing used to be with the osmc/kodi install years ago on the exact same pi. Mkv HVEC H264 at 4.4 Mbps with AC3 sound 384 Kbps: plays smooth in browser. Sure, it’s not what you want if you’re doing the ultrahd 4K i don’t know what, but is good enough for me.

          3. invest in the silly cooling accessories. It is worth it. Putting a tiny deskfan on the pi within a minute drops temperature 15-20 °C, while libraryscanning + videostreaming… Glue the cooling elements (1 € or even less) on the chips, buy the tiny fan or a case with fan built in. It’s another 6-12 € that is more than worth it.

          4. stay away from HDD. They eat lots of energy. SSD is worth it. Even if HDD has external power source: they are slow as fuck, takes a while for disks to start spinning. They’re still usefull, as back-up. Another reason to go the DIETPI-way: the back-up disk / live disk shit is easy peasy built in there! No messing around searching how to set that up. Same with (auto-)mounting drives in general by the way.

          5. The only downside so far: the Nordvpn-meshnet approach for remote access was a bit more annoying. It’s not integrated in the dietpi-vpn (or not yet). So you gotta install nordvpn seperately and make that work.

          TL;DR: DIETPI !!!