Hello, not sure whether this is right place to ask, but I’ll ask anyway. I’m looking for mouse replacement, but I do need the mouse to be quieter than your usual “click click clik”, as I often use it in the evening in a room with other people sleeping. Usage is about 50:50 office and single player gaming, so I don’t need the best sensor tracking or the fanciest RGB (I nor need nor want that at all), I just want well working, silent mouse.

I hold my mouse mostly in claw/fingertip grip, so I can’t operate something big, Deathadder-like. Ambidextrous shape is fine (maybe even preferred), as long as it has 2 thumb buttons on the left side. I used to have Logitech G305 which was almost perfect, except for 2 things: 1) very loud clicks and 2) mouse wheel got nasty swollen over time to the point it stopped rolling at all.

I’m using something people describe as “PWNAGE symm 2 clone” from local store brand, that is exactly what I need (smaller shape, silent), but its sensor is somehow starting to act weird after like 3 years? It’s been discontinued so I can’t buy replacement one.

Or if you know better place to ask (other than /r/…), I’d be glad. Thank you very much!

  • tal@lemmy.todayEnglish
    3·
    4 months ago

    I don’t use any myself, but my first search turns up a couple options:

    Or if you know better place to ask (other than /r/…), I’d be glad.

    This is on Reddit, but it has people talking about just buying new mouse switches for arbitrary mice and resoldering them.

    https://old.reddit.com/r/MouseReview/comments/11ay2sq/silent_mouse_switches/

    I’m not familiar with this, but it sounds like it’s practical to just take a mouse, buy new mouse switches, swap them out, as long as you can solder. So if you’ve got another mouse that does what you want – and it sounds like you like the Logitech G305 – you can probably just modify it, if you’re willing to put in the effort. I’d read up on this further before going that route.

    This post specifically deals with replacing the switches on a Logitech G305 to make it silent:

    https://old.reddit.com/r/MouseReview/comments/vi1z4p/how_to_make_a_g305_silent_this_works_for_other/

    Additionally, it looks like silent mice are a thing, so you’ve probably got a number of options out there if you want off-the-shelf.

    • kaedon@beehaw.org
      2·
      4 months ago

      I can highly recommend this! The switches are very cheap and I love my silent G305. The hardest part was probably the middle click button but you can skip that one if you don’t care about it as much. While you’re inside, you could clean the scroll wheel which might fix your swelling problem.

      Here’s the switches: https://www.aliexpress.us/item/3256803887113310.html And the video: https://www.youtube.com/watch?v=VKPUPIjv1kI

      I am not very skilled with solder and found it very easy. You don’t need anything fancy like a desoldering gun. Just a regular soldering iron with some solder and flux worked for me.

      • kurcatovium@lemm.eeOPEnglish
        2·
        4 months ago

        Soldering should be fine, this will probably end up as long winter evening project at some point. Was it possible to re-use gliders after dismembering the mouse?

        Swelling problem won’t be fixed as easy. The material of the wheel just expanded, the rubber is twice as big as new one to the point it can’t fit in its hole in the mouse. Internet is full of the same problems, it was either defective batch or it reacts with some specific agent in some people’s sweat. Never the less, the only way is to replace the whole wheel. Need to find out which of my friends have a 3D printer…