Hi y’all im looking for a networking solution to get good wifi connection throughout the single story apartment.
Please bear with me, I am an absolute newbie and maybe sound totally stupid in this.
Our network will be just about 1gbps…
Problem my ONT location is located near my main door and isnt exactly the best place I want to put my wifi router. Our ONT is in a box and located near is a datapoint that runs cables to each of our rooms and living area.
I am wondering if it is possible to do this setup
ONT -> non-wifi router -> datapoint -> 1 x wifi router in my living room and 1x wifi router in my main bedroom.
Does this make any sense?
And can my 2x wifi router be like a mesh network?
I was thinking to use a non-wifi router because Im thinking it’ll be cheaper? Or maybe I will just use the one from my ISP for that? Does it make sense?
You want any 2nd or 3rd routers in an AP mode or just use a WAP (Wi-Fi Access Point)
This may help clarify a bit of the mystery of networking Home Networking Basics https://www.youtube.com/watch?v=fjRKID2ucPY&list=PLqkmlrpDHy5M8Kx7zDxsSAWetAcHWtWFl
Any router will you recommend? Maybe one that is WiFi 6E (not sure if 6E is needed, maybe WiFi 6 will suffice)
All mine are older but Asus have traditionally been decent. I personally have switched over to using a custom router for none options and capability and a WAP (Wi-Fi Access Point) like Unifi. The WAP tends to be cheaper and generally all one needs to upgrade.
If you’re looking for a router specifically a mini pc or open router box can make it easy. Like Protectli Quotom etc. Then run OpnSense on it and will be the last router software you need to learn. Consumer grade stuff is generally mediocre and prices have gotten a bit ridiculous.
If you think you might want multigig LAN ports in the future look for one with the ports or a Thin Client/miniPC/SFF with expansion port and add a NIC to suit your needs.
Do you need to use Unifi dream machine with their proprietary software to manage your network if you use their WAP( like Accesspoint U6 and Accesspoint U6 Mesh?)
The Unifi system requires a controller. Either a cloudkey, a Dream Machine type device OR the controller software running on a device on the network. But it technically only needs to run for setup or datalogging. Then can be turned off if desired.